Suzhou Jun Hui Import and export trade Co., Ltd.
Suzhou Junhui Import and export trade Co., Ltd.
Add to Cart
Poly Solar Power Solar Panels , Fire Rated Solar Module Panel DC 1500V
Glass
* High-transmittance and low reflection
* Inspection:GB15763.2-2005.ISO9050
* High solar transmittance
* High mechanical strength
* High flatness
Solar Cell
* High output-power: conversation efficiency is 17%-20%
* High shunt-resistance: adapt the several environmental conditions.
* Bypass diode minimizes the power drop by shade
* Excellent low light effect
* Low breakage rate
Physical characteristics:
| Name: | Solar Power Solar Panels | Maximum Power: | 365.0Wp |
|---|---|---|---|
| Open Circuit Voltage(Voc): | 47.82V | Short Circuit Curent(lsc): | 9.75A |
| Voltage At Pmax(Vmp): | 39.38V | Current At Pmax(lmp): | 9.27A |
| Condition: | New/Used | OEM: | Available |
Module Name: CHSM6612M/HV-365
Maximum Power:365.0Wp
Open Circuit Voltage(Voc):47.82V
Short Circuit Curent(lsc):9.75A
Voltage at Pmax(Vmp):39.38V
Current at Pmax(lmp):9.27A
Maximum System Voltage: DC15o0V
Power Tolerance:0~+5W
Nominal Operating Cell Temp(NOCT):46℃
Cell Technology: Mono-si
Fire rating: ClassC
Module Application: Class A Module Safety Class
Solar Cell Production Line
Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight.
Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.
Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.
PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.
Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.
